Heating & Air Conditioning Expert with 25 years of experience

Mon-Sat: 8:00am - 5:00pm

24h Emergency Service

Call Today 423-202-7315

Greater Tri Cities, TN and beyond

All In One Flat Rate Fee

GeoThermal PM
$ 65
  • Check the various components of the system and clean them as necessary
  • Examine the drain pan and trap for blockages or leaks
  • Check the antifreeze level in the underground piping
  • Assess the condition of the underground piping
  • Re-pressurize the system if needed
  • Measure loop temperature, flow rate, pressure drop, and other factors to verify that the system is performing properly
  • Evaluate the condition of the coil
  • Look for corrosion and other red flags that might signal the approach of future problems
*rates are subject to change
Zone System
$ 65
  • Check refrigerant levels and inspect for leaks
  • Clean and straighten condenser coils to ensure proper air flow
  • Check gas connections for leaks
  • Tighten all electrical connections
  • Lubricate all moving parts
  • Test thermostat to make sure it’s cycling the system on and off properly
  • Check air filter
*rates are subject to change<br /> * per system
Air Cleaner
$ 65
  • Check heating and cooling system controls to verify proper start-up, operation and shutdown
  • Ensure that the condensate drain is not clogged
  • Lubricate moving parts, specifically fan motor
  • Ensure electrical connections are functioning properly and test the electric voltage to the motor
  • Perform thermostat-setting diagnostics
  • Clean evaporator and condenser coils
  • Confirm that refrigerant levels are correct throughout the heating and cooling system
  • Inspect the blower and associated components to ensure that they are clear and functioning correctly
  • Inspect furnace components
*rates are subject to change<br />
Air to Air Heat Pump
$ 65
  • Inspect ducts, filters, blower, and indoor coil for dirt and other obstructions
  • Diagnose and seal duct leakage
  • Verify adequate airflow by measurement
  • Verify correct refrigerant charge by measurement
  • Check for refrigerant leaks
  • Inspect electric terminals, and, if necessary, clean and tighten connections, and apply non-conductive coating
  • Lubricate motors, and inspect belts for tightness and wear
  • Verify correct electric control, making sure that heating is locked out when the thermostat calls for cooling and vice versa
  • Verify correct thermostat operation.
*rates are subject to change<br /> * per system
$ 65
*rates are subject to change

Not sure which package is right for you? Schedule a consultation now.

List of Average Air Conditioning Repair Cost

The air conditioning repair costs listing below are for reference only.

$225 – $1600
*Type, amount, etc varies

$120 – $590
*Depends on availability in most cases

$125 – $470

$200 – $650
*may include refrigerant

$1350 – $2300
*Size and type variables

$1900 – $2900
*Not evap coil